DSO/FSCOPE-500K Dimensions

All dimensions described below assume you are looking at the board from above with the BNC connectors closest to you.

Board revision 4c and lower

3400mil (86.36mm) wide x 3900mil (99.06mm) high Tolerance: 16mil (0.4mm)

63mil +/-8mil (1.6mm +/-0.2mm)

The centre is 150mil (3.81mm) from the two nearest edges

130mil (3.3mm) diameter Tolerance +/-8mil (+/-0.2mm)

The centre of the connector (along the y axis) is 787.7mil (20mm) from the nearest edge (measured along the x axis of the board)

504mil (12.8mm)

Same as 4c except

The centre of the connector (along the y axis) is 802.72mil (20.39mm) from the nearest edge (measured along the x axis of the board)